top of page
.png)
610S EverServe®
Model 610S
This heavy duty springless service door is well suited for applications that require the security and performance of a rolling service door with the added benefits of increased cycle life, reliability, and ease of serviceability. The fenestration option allows for air circulation and visibility, making it an ideal solution for facility managers seeking to replace parking garage grilles.
Color Options
Standard Exterior Color
White
Brown
Gray
Tan
Powder Coat Color Options
PowerGuard Premium Powder Coat Options Available in Approximately 200 Colors as Well as Custom Matching to Specification
Construction
Standard Max Width: up to 30' (9246 mm) depending on gauge and slat type
Standard Max Height: up to 20' (6096 mm) depending on gauge and slat type
Mounting: Interior or exterior face of wall
Control Panel: Electronic controller with microprocessor self-diagnostics. Digital readout indicates door action, alarm conditions, and fault conditions. Time delay self-close timer and non-resettable cycle counter is included. One open/close/stop push button station integrated in control panel. Enclosure is IP54 rated (NEMA 3 equivalent)
Curtain: Galvanized steel interlocking roll-formed slats, end locks attached to prevent lateral movement; Curved profile type C-187 for doors up to 15'4" wide - 22 gauge; Curved profile type C-275 for doors from 15'5" to 18'4" wide - 22 gauge; From 18'5" to 25'4" - 20 gauge; From 25'5" to 30'0" - 18 gauge​
Curtain Finish: Gray, Tan, White or Brown polyester top coat
Bottom Bar: Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with weatherstrip
Hood: 24-gauge galvanized steel primed; motor and end cover provided
Brackets: Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel
Guides: Three structural steel angles PowderGuard® Premium powder coated black; With high cycle UHMW wear strip
Door Roll: Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device
Safety Devices: Built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel. Photoelectric safety sensors with guards - provide obstruction monitoring during door operation to help prevent injury and damage
Operation: Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled; Manual hand chain for power outage. Horsepower appropriate to door size/weight; 230V AC 3-phase motor
Actuator: Single open/close/stop push button station incorporated into control panel
Wind Load: 20 psf
Options
Motor Options: 208 V AC 1PH, 220V AC 1PH, 208V AC 3PH, 230V AC 3PH, 460V AC 3PH, 575V AC 3PH
Curved profile type C-187 for doors up to 15'4" Wide. Available in: 20, 18 gauge galvanized steel; 22, 20 gauge stainless steel; 18 gauge aluminum
Curved profile type C-275 for doors up to 30' wide. Available in: 20, 18 gauge galvanized steel; 22, 20 gauge stainless steel; 16 gauge aluminum
Flat profile type F-265 for doors up to 30' wide. Available in: 20, 18 gauge galvanized steel; 22, 20 gauge stainless steel; 16 gauge aluminum
Fenestrated 18 gauge steel slats or vision lites with uniformly spaced openings of 3" x 5/8" either slat profile or 10" x 1" flat slat profile only
Perforated 18 gauge steel slats with 1/16" diameter perforation; spaced 3/32" on center
Bottom bar also available in galvanized steel, stainless steel & aluminum
Guide options include galvanized steel, powder coated steel
Hood available in powder coat, stainless steel and aluminum. Sloped hood also available
Brackets also available in powder coat, galvanized steel
IP65 Control Panel (NEMA4/4X equivalent)
Sensing edge for improved safety
Additional set of photoelectric sensors
Optional push buttons, loop detectors, radio control, motion detectors or any combination thereof available for door operation/control
PowerGuard Premium powder coat and PowerGuard Max hardened powder coat available in approximately 200 colors as well as color-matching to specification
PowerGuard Textured Finish; Industrial textured powder coat provides a thicker, more scratch resistant coat for added product protection on guides, bottom bar & head plate
High wind load options available
bottom of page