top of page
.png)
625S EverServe®
Model 625S
This heavy duty Stormtite™ insulated springless service door delivers security, reliability and ease of serviceability and is best suited for applications that require protection against weather extremes. The insulated slats provide climate control as well as sound reduction, while perimeter seals provide additional protection from weather.
Color Options
Standard Exterior Color
White
Brown
Gray
Tan
Powder Coat Color Options
PowerGuard Premium Powder Coat Options Available in Approximately 200 Colors as Well as Custom Matching to Specification
Construction
Standard Max Width: Up to 30' depending on gauge & slat type
Standard Max Height: Up to 20' depending on gauge & slat type
Mounting: Interior or exterior face of wall
Control Panel: Electronic controller with microprocessor self-diagnostics. Digital readout indicates door action, alarm conditions, and fault conditions. Time delay self-close timer and non-resettable cycle counter is included. One open/close/stop push button station integrated in control panel. Enclosure is IP54 rated (NEMA 3 equivalent)
Curtain: Galvanized steel interlocking roll-formed slats, end locks attached to prevent lateral movement; Insulated flat profile (F-265i) for doors up to 30' wide - front and back slats 24 gauge. Slat cavity shall be filled with CFC-free, foamed in-place, polyurethane insulation
Curtain Finish: Gray, Tan, White or Brown polyester top coat
Bottom Bar: Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with weatherstrip
Hood: 24-gauge galvanized steel primed; motor and end cover provided
Brackets: Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel
Insulation: R-value* of 7.71 for energy-efficiency. U-value of .13 and STC rating of 21
Guides: Bottom, exterior curtain-side guide, interior hood baffle. Three structural steel angles PowderGuard® Premium powder coated black; With high cycle UHMW wear strip
Door Roll: Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device
Stormtite™ Perimeter Seal System: Exterior guide seal, interior hood baffle, bottom astragal
Safety Devices: Built-in braking mechanism provides additional peace-of-mind against uncontrolled curtain travel. Photoelectric safety sensors with guards - provide obstruction monitoring during door operation to help prevent injury and damage
Operation: Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled; Manual hand chain for power outage. Horsepower appropriate to door size/weight; 230V AC 3-phase motor
Actuator: Single open/close/stop push button station incorporated into control panel
Wind Load: 20 psf
Options
Motor Options: 208 V AC 1PH, 220V AC 1PH, 208V AC 3PH, 230V AC 3PH, 460V AC 3PH, 575V AC 3PH
Flat profile type F-265i for doors up to 30' wide. Available in: [Front Slat] 22, 20, 18 gauge galvanized steel; 22, 20 gauge stainless steel; 18 gauge (.040") aluminum [Back Slat] 22 gauge steel; 24 gauge stainless steel; 22 gauge (.024") aluminum
Bottom bar also available in galvanized steel, stainless steel & aluminum
Guide options include galvanized steel, powder coated steel
Hood available in powder coat, stainless steel and aluminum. Sloped hood also available
Brackets also available in powder coat, galvanized steel
IP65 Control Panel (NEMA4/4X equivalent)
Sensing edge for improved safety
Additional set of photoelectric sensors
Optional push buttons, loop detectors, radio control, motion detectors or any combination thereof available for door operation/control
PowerGuard Premium powder coat and PowerGuard Max hardened powder coat available in approximately 200 colors as well as color-matching to specification
PowerGuard Textured Finish; Industrial textured powder coat provides a thicker, more scratch resistant colt for added product protection on guides, bottom bar & head plate
High wind load options available
Uniformly spaced glazed acrylic vision lites available in 3" x 5/8" or 10" x 1"
bottom of page